About admin

How to fix the leaking faucet?

Fix the leaking faucet easy

Faucet cartridge:

A damaged washer may cause the cartridge of the faucet to become worn out by the metal core,or the deposition of chemicals in the water may form a residue that prevents the gasket from being fully compressed with the cartridge.

How do you fix the broken faucet cartridge? Of course, you can change the whole faucet. Another option is to change the faucet cartridge only. If you have the right tool, called the seat wrench,it’s easy to remove the old seat. Insert the seat wrench into the seat and pull it in an anticlockwise direction. Once you remove the old seat, make sure that the new seat you bought is the same as the original one.

After you fix the leaking faucet,you also want to
clean your faucet,don’t worry about that,it is easy to do it.
Let my faucet always bright as new –
stainless steel faucet cleaning method

The O ring of the faucet

The kitchen faucet has one or several O rings to prevent water from pouring around the outlet.

If the O ring is worn off, you will see a water outlet at the bottom every time you turn on the faucet.

Fix the leaking faucet, following is the replacement of O ring tools needed: O type adjustable wrench,pipe joint tape, replacement.

Steps to replace the O ring:

Step 1: turn off the water supply, turn counterclockwise and remove the threaded nut at the fixed.

Always use tape to wrap the nut to prevent it from being scratched by a pliers or wrench.

Step 2: remove the coupling nut and lift the water outlet up. Take it out of the water outlet seat.

In the water outlet seat, you can see the O rings.

Step 3: replace the bad ring with the new size of the exact same ring. Assemble the tap again.

To know more HCfaucet new design.see https://hcfaucet.com

Get the free samples to evaluate our quality.Got it now.

How to clean faucet?

Now stainless steel faucets were used in many families,bright polished flashing light when it was still new,looked more comfortable.

But a month later, you will find that the surface black, Not only light, but also dirty,and not work with using ordinary detergent simply wash clean, the surface of the stainless steel can not use wire brush the ball,because after the wire brush the ball will leave can not repair the scratches on the surface of stainless steel.
Here you use the simple method of cleaning a stainless steel faucet, a few simple steps, you can make our tap again bright.

In order to write this article, I have kept a faucet for a long time not to wash, and so it is dirty, I can not stand,and then start, so that the effect is obvious, you can see clearly.

Stainless steel faucet cleaning method,Preparation kit:

A toothpaste, an old toothbrush, an old silk stocking, an orange peel, a clean cloth and your hands.

1.Take toothpaste in the stainless steel faucet dirty place, with a wet toothbrush dipped in toothpaste repeatedly scrub, and then rinse with clean water, dry with clean cloth.

2. Use a scouring pad or old silk stockings to wipe back and forth on the tap.

3.And then use orange peel in the metal surface of the tap back and forth again (orange peel contains acid,can maintain the stainless steel surface), and then wipe it with a clean soft cloth on the OK. At this point you’ll find that the faucet has returned to its former light.

How about stainless steel faucet cleaning method? The effect is obvious!

All go back to the home tap one by one to wash it.

Why Stainless steel faucet being use widely

Stainless steel faucet

Stainless steel faucet use stainless steel to made faucet products, because stainless steel

is an international institutions recognized can be good for the human body health material,

lead-free, and resistant to acid? Alkali?Corrosion resistant? Does not release harmful substances,

so use lead free stainless steel will not pollute the water source, to ensure human healthy.

Advantages and Disadvantages of Stainless Steel Faucets

Advantages of stainless steel faucets:

1, Health lead-free:

Stainless steel faucet health material, no lead, health and safety, will not release lead and other heavy

metal pollution, to ensure the safety of the terminal water.

2, Durable:

Stainless steel faucet life of up to 50 years, to achieve the same life with the building, and life cycle

almost no maintenance, low operating costs, to avoid the replacement of the cost and trouble.

3, Easy to clean and easy maintenance:

Stainless steel faucet surface will not rust, not raw copper green, it will not pitting, so it is very

easy for the daily cleaning and maintenance to the families.

4, Green:

Stainless steel faucet surface without plating, will not cause pollution to the surrounding environment;

its material can be recycled recycling, to avoid waste of resources.

5, Excellent corrosion resistance:

Stainless steel faucet surface thin and dense chromium-rich oxide film makes the stainless steel pipe,

including soft water, including all the water quality has good corrosion resistance, even if it is being

use at underground also has excellent corrosion resistance.

6, Good temperature performance:

Stainless steel pipe can be -270 ℃ -400 ℃ temperature long-term work safely, whether it is high

temperature or low temperature, will not release harmful substances, material performance

is quite stable.

7, Excellent mechanical properties:

Stainless steel faucet made of 304 materials made of stainless steel tensile strength greater

than 530N / mm, galvanized pipe is 2 times, 3-4 times the brass, PPR tube 8-10 times, and

has good ductility and toughness.

8, Better insulation performance:

Stainless steel water pipe insulation performance is 24 times the brass, reducing the heat loss,

especially for hot water delivery.

Disadvantages of stainless steel faucets:

The production process is complicated, the technical level of high demand, the process is

not mature,  has this size of the manufacturer is not much, that is why the price is relatively high.

Chrome faucet Vs Stainless Steel Faucets

Chrome faucet Vs Stainless Steel Faucets

If you gravitate toward shiny things and you’re in the market for a kitchen faucet, chrome and stainless steel finishes are good options because they are bright, durable and relatively low-maintenance.

The differences between chrome and stainless steel are subtle, and choosing between them ultimately comes down to personal preference and which finish best complements your kitchen sink and appliances.

These are popular options when budget is a consideration, as both cost less than nickel and bronze faucets.

  • Stainless Steel Faucets

Chrome for High Shine

Chrome faucets get their shiny finish from chrome electroplating over another metal.

Chrome is shinier than stainless steel, which is great for aesthetics but more challenging to keep clean.

Water spots and fingerprints are more noticeable on chrome because they contrast more sharply with the shine of the rest of the faucet.

Additionally, abrasive kitchen cleaners may mar chrome’s finish over time.

Stainless Steel for Easy Care

Shiny, but less so than chrome, stainless steel faucets are lower-maintenance because they disguise spots and smudges better than chrome.

Stainless steel is valued over chrome for its durability and scratch-resistance. Shoppers will find more stainless-steel faucet options from which to choose, as homeowners who need a faucet but don’t have an aesthetic preference frequently opt for stainless because of its low cost.

The service life more than 10 years, but the surface as new.

Stainless Steel Advantages

Stainless steel is durable, versatile and easy to maintain. Unlike chrome and nickel, it doesn’t display spots as easily and keeps its shiny appearance.

Daily maintenance can be as simple as cleaning the surfaces with a sponge and water, and drying with paper towels or a cloth. You do not have to purchase special cleaning formulas to restore the luster and shine.

In most cases, a small amount of hand pressure applied to the surface to buff and polish the stainless steel is all that’s necessary.

Comparison to Nickel

The finish of stainless steel is always shiny, whereas brushed nickel has a matte or semigloss finish. As a result, stainless steel will blend well if you have other stainless steel appliances and surfaces in a kitchen or bathroom, such as sinks.

It is also easier to match stainless steel faucets and fixtures, regardless of the faucet manufacturer. Brushed nickel, on the other hand, is more difficult to match and coordinate with other appliances, if not altogether impossible or cost-prohibitive. This makes it easier to create a seamless look between faucets and fixtures for kitchen appliances and fixtures by using stainless steel.

People who choose brushed nickel do so because they want the fixture and the brushed nickel finish to stand out and are not relying on the object to blend in seamlessly with other appliances and fixtures.